►TOP METERED ►TOP MIXED ►TOP IN USE

DOSING AT THE HIGHEST LEVEL.

Process stability is the decisive quality feature of dispensing systems. The TOP 7000 Pro dosing system not only guarantees the highest part quality, but also reliable continuity. Thanks to the precise mixing ratio of silicones and additives and the outstanding efficiency of the system, the TOP 7000 Pro sets a new benchmark in the market.

POWERFUL

► Rate more than 5 liters/minute / 1.32 gallon/minute*

► Max. Pump pressure: 210 bar / 3046 psi (Pump unit S) | 230 bar / 3336 psi (Pump unit M)

► High-precision mixing ratio - volume Counter cell resolution 15.6 µl/l

ECONOMIC EFFICIENCY

► Material utilization per container: up to 99.8 % (Pump unit S) | up to 99.6 % (Pump unit M)

► High-quality components = service life of 20+ years

► Low maintenance costs

► Maximum process stability thanks to integrated high-precision volume counting

ENERGY EFFICIENCY

► Electrical energy consumption approx. 50 Wh

► Minimal idling losses - no pressure loss

VERSATILE IN USE

► FDA / EMA compliant

► Widest viscosity range on the market:
Pump unit S: 0.001 to 2000 Pas** (16,000 Pas***)
Pump unit M: 0.001 to 3000 Pas** (>16,000 Pas***)

SAFETY

► Safest system on the market (EN ISO 13849-1)

► Fully automatic drum change from the edge of the drum

► Intuitive and simple operation

USER-FRIENDLY

► Can be fully integrated into machine control systems (OPC UA | Euromap 82.3)

► Fully automatic de-airing

► Air detection

Put an end to the myth that pneumatically driven dosing systems consume more energy than purely electric systems. Elmet dosing systems set new standards: our technology requires up to 50 %* less energy than purely electrically driven pumps and reduces your CO2 emissions, which protects the environment and saves costs.

Compressed air is one of the most expensive energy sources! That's right! 
But when used correctly, compressed air can even save energy, as comparative measurements on various dosing systems show. Since compressed air as a pneumatic spring is a perfect energy store, ELMET dosing systems consume virtually no energy while they are being serviced. With an idle power consumption of just 50 Wh and an average energy consumption of 150 to a maximum of 400 Wh, compressed air even beats all-electric systems.

WHAT DOES THAT MEAN FOR YOU?

► Reduced energy consumption
Elmet dosing systems consume up to 50 % less energy compared to purely electrically operated pumps. This leads to considerable energy savings.

► Cost savings
Reduced energy consumption reduces operating costs, which leads to a reduction in overall production costs.

► Environmental friendliness
Less energy consumption also means a lower CO₂ impact and therefore a smaller ecological footprint. This supports environmentally conscious production goals.

► Competitive advantage
Companies that use energy-efficient technologies can position themselves better on the market and highlight their sustainability efforts.

► Greater efficiency
The optimum energy efficiency of Elmet dosing systems can contribute to a better overall performance of the production plant.

Choose a sustainable future - choose Elmet!